XTS-B – Steel magnetic drive pump with open impeller
One of CDR's flagship products for liquids containing solids.
The X Series is suitable for applications with corrosive, toxic, or hazardous fluids in cases where:
• The liquids being pumped have a high concentration of solids, therefore the use of a standard magnetic drive pump would cause frequent blockages and failures;
• A pump compliant with ATEX regulations is required (ATEX Zone 1 internal and external).
The circulation of the fluid laden with solid particles is ensured by the large flushing channels within the pump. This way, the diamond bushings and the cup are properly cooled. The axial flushing hole in the impeller shaft also ensures a continuous exchange of pumped liquid between the cup and the volute.
Available in bare shaft and monoblock versions.
Permissible temperature up to +180°.
Main technical features of the model:
| Sealing System | Magnetic Drag |
| Design: | EN 22858; ISO 2858 |
| Standard | EN 15783 |
| Body Material: | 1.4408 |
| Bushings/Shaft Material: | Diamond Compound |
| Body Type: | Radially Split Volute Casing |
| Spinning Material | 1.4408 |
| Rotor Type: | Open |
| Aspiration Position | End suction |
| Execution | Horizontal – Close-Coupled |
| Pull-out design | Yes |
| Connection Types: | Flange |
| Flange | UNI 1092-1 (ISO 7005-1) PN16RF |
| Self-priming | Non-priming |
| Lubrication: | North America |
| Maximum Pressure Range @20°C: | Pressure Nominal 16 |
| Fluid temperature range: | -40°F / +356°F |
| Maximum prevalence @ 2900 RPM: | 65 meters |
| Maximum Flow @ 2900 RPM: | 70 m³/h |
| Viscosity Range | 0.5 cSt – 180 cSt |
| Maximum Installable Power | 18.5 kW |
Sign up for our newsletter
Get an exclusive look at the latest products and the most important news.
"*" indicates required fields