DTN ISO – Magnetic Drive Process Pumps
The DTN ISO, which will replace our long-standing UTN over the next few years, was designed primarily for the European market.
This magnetically driven lined pump is among the industry's best thanks to its long service life, low maintenance costs, and high performance in terms of flow rate and head with minimal energy consumption.
The new dynamic tree execution ensures greater pump reliability minor axial thrust along the entire performance curve
For more information, learn more in our article on the new DTN range.
https://www.cdrpompe.com/pompa-trascinamento-magnetico-2025/
Main technical features of the model:
| Sealing System | Magnetic Drag |
| Design: | EN 2258; ISO 2858; ISO 15783 |
| Body Material: | ETFE Lined |
| Bushings/Shaft Material: | SSIC |
| Body Type: | Radially Split Volute Casing |
| Spinning Material | ETFE Lined |
| Rotor Type: | Closed |
| Aspiration Position | End suction |
| Execution Type: | Horizontal – Long-Coupled |
| Pull-out design | Back pull-out |
| Heating Shirt | North America |
| Connection Types: | Flange |
| Flange | UNI 1092-2 / ISO 7005-2 PN16 Type B Slotted ANSI 150 RF |
| Self-priming | Non-priming |
| Lubricant type: | Grease lubrication |
| Maximum Pressure Range @20°C: | Pressure Nominal 16 |
| Fluid temperature range: | -4°F / 248°F |
| Maximum prevalence @ 2900 RPM: | 115 m |
| Maximum Flow @ 2900 RPM: | 115 m³/h |
| Viscosity Range | 0.5 cSt – 150 cSt |
| Maximum Installable Power:: | 22 kW |
| Sealing System | Magnetic Drag |
| Design: | EN 2258; ISO 2858; ISO 15783 |
| Body Material: | ETFE Lined |
| Bushings/Shaft Material: | SSIC |
| Body Type: | Radially Split Volute Casing |
| Spinning Material | ETFE Lined |
| Rotor Type: | Closed |
| Aspiration Position | End suction |
| Execution Type: | Horizontal – Close-Coupled |
| Pull-out design | Back pull-out |
| Heating Shirt | North America |
| Connection Types: | Flange |
| Flange | UNI 1092-2 / ISO 7005-2 PN16 Type B Slotted ANSI 150 RF |
| Self-priming | Non-priming |
| Lubricant type: | No |
| Maximum Pressure Range @20°C: | Pressure Nominal 16 |
| Fluid temperature range: | -4°F / 248°F |
| Maximum prevalence @ 2900 RPM: | 115 m |
| Maximum Flow @ 2900 RPM: | 115 m³/h |
| Viscosity Range | 0.5 cSt – 150 cSt |
| Maximum Installable Power:: | 18.5 kW |
Sign up for our newsletter
Get an exclusive look at the latest products and the most important news.
"*" indicates required fields