CCL – mechanical seal lined and plastic
The pump model CCL/CCL-B It is characterized by a lined coating of the wetted parts in PP (Polypropylene). The main features/strengths of this model are:
Possibility of mounting single and double mechanical seals.;
Radial fins, closed and open;
The shaft collar has a stainless steel core coated with polypropylene via transfer molding;
Available in a double version, CCL with “back pull-out” design, bearing housing, and the possibility, through a flexible coupling, to be coupled to motors in B3 form and CCL B monobloc version with motors in B5 form.
Main technical features of the model:
| Sealing System | Mechanical Grip |
| Design: | EN 22858, ISO 2858; ISO 5199 |
| Body Material: | PP Lined |
| Body Type: | Radially Split Volute Casing |
| Spinning Material | PP Lined |
| Rotor Type: | Closed, Radial |
| Intake Position: | End suction |
| Pull-out design | Yes |
| Heating Shirt | North America |
| Connection Types: | Flange |
| Flange | UNI 1092-2 (ISO 7005-2) PN16RF slotted to ANSI 150 |
| Self-priming | Non-priming |
| Lubrication: | Oil |
| Maximum Pressure Range @20°C: | Pressure Nominal 16 |
| Fluid Temperature Range: | PP: -10°C / +70°C |
| Maximum Torque @ 2900 RPM: | 75 meters |
| Maximum Flow Rate @2900 RPM: | 250 meters3/h |
| Viscosity Range | 0.5 cSt – 180 cSt |
| Maximum Installable Power | 55 kW |
Sign up for our newsletter
Get an exclusive look at the latest products and the most important news.
"*" indicates required fields