Magdrive and mechanical seal industrial pumps
Horizontal and vertical centrifugal pumps

E 492 wattmetric relays

Multirange - 2 thresholds
Direct insertion up to 7A
For higher voltages, CT .../1A or ../5A is applied
Second set point programmable as min or max set point.

DEFINITION
The E 492 wattmetric relay receives information on the voltage (V) and on the current, calculates the cos φ value, therefore the following:

(ACTIVE POWER) w = 1.73 cos φ

USE
An active power relay is typically used to check the active power absorbed by an electric motor which provides direct information on the load applied to that motor. Such information is more accurate than the one given by the current value. Actually, the cosφ variations can change the power values without affecting current values markedly.

SUPPLY: single voltage
2VA 50-60Hz tolerance -10% ÷+6%
19-20: 115Vac or 230Vac or 24Vac


DIMENSIONS
105x90x75 mm - "modular" for DIN guide

ACCESSORY On request: M48E transparent guard, sealable

OPERATION TEMPERATURE0÷70°C

WEIGHT: Kg 0.550

COLORgrey

 W09 wattmetric relay with RS 485

Operating features
W09 is mainly used for measuring and displaying active power.
Sp1 and Sp2 alarm set points can be set to values beyond which W09 will step in to trigger the alarm relay within a period of time corresponding to T1 and T2 respectively
When in self-learning mode, Sp1 and Sp2 will be set automatically
The device maintains the settings even power supply is turned off.

Technical data
Parameter settings
Using the Up/Down keys on the device front panel
Using the Up/Down keys on the device front panel and automatically when in self-learning mode.
Via RS485 using the software (W09-SUPERVISOR) coming with the device
This device can be connected to a PC through a special software (W09-SUPERVISOR) to store the values collected. These values are saved to files that can be easily processed by applications such as Excel and others.

Measures and displays on screen
Instantaneous W active power (in kW)
IA1, IA2 (auxiliary 4-20mA inputs ) expressed in percentage (4mA=0% 20 mA=100%)
Set up parameters (times and thresholds)
Information
Led indicating that the power has gone beyond its minimum value (LED SP2)
Led indicating that the power has gone beyond its maximum value (LED SP3)
Alarm led (LED A)
No current led (LED I=0)
Current direction led (LEF I)
Back-lit 2x8 LCD display
Supply: 230 VAC
Measuring current: direct up to 5A, with external TA up to 150A currents
Output: relay, usually OFF, 5A NA contacts, 3A NC 250Vac resistive load
Serial output: RS485 connecting to monitoring PC
Electrical connections: 2.5 sq mm cable screw clamps
Weight: 500 g
Casing: 100 x 70 x 110 mm for DIN GUIDE

CDR Pompe SpA
Milan: Tel. +39 02 9901941
Vicenza: Tel. +39 0444 526180
Rome: Tel. +39 06 56323052